II. Task F. Performance and Limitations

⚠️ Disclaimer: This is for educational purposes only. I am not a certified flight instructor (CFI)... yet. (Working hard on it!) Until then, please don't use this as a substitute for professional flight training. Always consult a real CFI and follow your aircraft's POH. I accept no liability for any actions taken based on this content.

1. Lesson Objective

  • The student can compute weight and balance for the PA-28-161, judge whether a load is within limits, and correct a load that is not.
  • The student understands the factors that affect performance and can read every PA- 28-161 performance chart used for flight planning.

2. Content

  • Family trip scenario to Bar Harbor (KBHB) as the running example
  • Effects of excess weight on performance (PHAK 10-2)
  • Weight and balance terms: datum, arm, moment, CG; standard and basic empty weight, useful load, MGW
  • The PA-28-161’s actual weight and balance record (basic empty weight and CG) and the POH loading table
  • Worked calculations: checkride load (in limits) and family trip load (CG beyond the 93.0-in aft limit)
  • Load factor limits (normal 3.8 G, utility 4.4 G) and utility category conditions
  • Forward vs aft CG: tail down force, stall speed, cruise efficiency, stability, stall/spin recovery
  • Three ways to fix a load: remove, shift, add, with recalculation and envelope check
  • Factors affecting performance: runway length, slope, surface, elevation, obstacles; personal weight minimum (2255 lbs)
  • Stall speed chart; types of altitude; pressure and density altitude; density altitude accident case study (NTSB WPR12LA283)
  • POH performance charts: airspeed calibration, short field takeoff (no obstacle and 50- ft obstacle), engine performance by serial number, climb, fuel/time/distance to climb, best power cruise, leaning, glide, descent planning (3:1 rule, ground speed × 5), landing distance
  • Appendix: setting up the PA-28-161’s weight and balance in ForeFlight

3. Schedule (about 2 hours)

Segment Time
Scenario introduction and effects of weight 10 min
Weight and balance terms and the PA-28-161’s record 15 min
Checkride load calculation and envelope check 15 min
Load factor limits and forward vs aft CG 15 min
Family trip calculation and the three fixes 20 min
Factors affecting performance, stall speed, density altitude, case study 15 min
POH performance charts and descent planning 25 min
ForeFlight setup and review 5 min

4. Equipment

  • Laptop or projector with the deck (case study video)
  • PA-28-161 POH (Sections 2, 4, 5, 6) and the PA-28-161’s current weight and balance record
  • Calculator, plotter or ruler for reading charts, printed loading form and CG envelope
  • iPad with ForeFlight
  • Whiteboard and markers

5. Instructor’s Actions

  • Start with the family trip and ask whether the flight can be made, before teaching any terms.
  • Explain the terms using the POH leveling diagram and the PA-28-161’s actual record.
  • Work the checkride load step by step on the whiteboard, then have the student work the family trip load.
  • Explain why aft CG is dangerous and why forward CG raises stall speed, using the tail down force.
  • Guide the student through the remove, shift and add fixes, and discuss what margin is acceptable.
  • Demonstrate each performance chart once with the example conditions, then have the student read the next value.
  • Use the density altitude case study to tie numbers to real risk.

6. Student’s Actions

  • Complete the weight and balance table for both loads and plot them on the CG envelope.
  • Choose and calculate a fix for the out-of-limits load.
  • Compute pressure and density altitude from given conditions.
  • Read the takeoff, climb, cruise, glide, descent and landing charts with the example conditions.
  • Plan a descent using the 3:1 rule and ground speed × 5.
  • Enter a load in ForeFlight and compare it with the hand calculation.

7. Completion Standards

  • The student computes total weight, moment and CG correctly and decides correctly whether the load is within limits.
  • The student corrects an out-of-limits load and verifies it on the envelope.
  • The student explains the effects of weight, CG and density altitude on performance.
  • The student reads each POH performance chart with correct entry conditions and arrives at reasonable values.

8. References

  • PA-28-161 Pilot’s Operating Handbook: Section 2 Limitations (2.13 CG limits, flight load factors); Section 4 Normal Procedures (cruising, approach and landing); Section 5 Performance (5-11 through 5-32 charts); Section 6 Weight and Balance (6-4 leveling diagram, 6-12 loading table, 6-14 CG envelope)
  • The PA-28-161’s weight and balance record (maintenance logbook)
  • Pilot’s Handbook of Aeronautical Knowledge (FAA-H-8083-25), Ch. 10 Weight and Balance; Ch. 11 Aircraft Performance; Ch. 5 Aerodynamics of Flight (load factor)
  • Aircraft Weight and Balance Handbook (FAA-H-8083-1)
  • NTSB accident report WPR12LA283
  • ForeFlight Weight & Balance user guide
Yaboong's Picture

Yaboong

Software engineer for seven years, now a pilot. CPL/IR, working toward CFI and the airline. Writing down what I learn along the way.
More about me →

Massachusetts, US gmail YouTube